Yamamoto Sound Craft : Models and Specifications
MGB-1 Magnet floating base 1 piece
MGB-1 adopts an epoch-making composition of doing the machine used floating by using the repulsion of the magnet. The neodymium magnet with the highest retentivity is adopted, and to use it also for a considerably heavy equipment, the magnet is designed. There are N pole and S pole in the magnet, and is a character of repulsing it at drawing between [chigakyoku] each other and the same pole intervals. MGB-1 is designed so that the equipment put up by using the repulsion action may do floating. [MORE]
MGB-1 Magnet Floating Base (Large)
Item# MGB-1
$149.00 
MGB-2 Magnet floating base 1 piece
New product MGB-2 is an epoch-making setting base that intercepts the vibration by using the repulsion action of the magnet that not is so far. More large-scale MGB-1 under the sale had already been miniaturized, and to use it for a comparatively small, light equipment, MGB-2 was planned. [MORE]
MGB-2 Magnet Floating Base (Small)
Item# MGB-2
$99.00
PB-9 Setting base made of Africa ebony (4 pieces set)
It is a pinpoint base of the diameter of 1.26" of the Africa ebony used for oboe etc. Or combining PB-10, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. The effect that specific gravity tightens sound by the pinpoint support effect for 1.4 and the strong, very heavy quality of the material becomes large. The height of 0.75" and a spike part of the height of a main part is 0.2". [MORE]
PB-9 Setting base made of Africa ebony (4 pieces set)
Item# PB-9
$49.00
PB-10 Setting base made of Africa ebony (4 pieces set)
It is a spike receptacle base of the diameter of 1.26" of the Africa ebony used for oboe etc. Or combining PB-9, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. When a metaled spike is received, in metal, resonance is suppressed and the sound which was clear and became tight by intrusion of a moderate spike is obtained. [MORE]
PB-10 Setting base made of Africa ebony (4 pieces set)
Item# PB-10
$49.00
PB-18 Spike receiving Base (4 pieces set)
It is the spike receptacle base which combined the spacer of ceramics with the back side of the Africa ebony used for oboe etc. When metal spikes are received, it catches firmly by an ebony and sidewall is the ideal spike receptacle that three points are supported by a ceramic spacer. The loose R attaches the surface of the ceramic spacer and it is difficult to damage a floor. [MORE]PB-18 Spike receiving Base (4 pieces set)
Item# PB-18 $89.00
PB-20 Setting base made of Africa ebony (4 pieces set)
It is a pinpoint base of the diameter of 1.6" of the Africa ebony used for oboe etc. Or combining PB-21, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. The effect that specific gravity tightens sound by the pinpoint support effect for 1.4 and the strong, very heavy quality of the material becomes large. The height of 0.83" and a spike part of the height of a main part is 0.2". Although it is of the same type as PB-9, since size is large, the stability at the time of installation increases.[MORE]
PB-20 Setting base made of Africa ebony (4 pieces set)
Item# PB-20
$69.00
PB-21 Setting base made of Africa ebony (4 pieces set)
It is a spike receptacle base of the diameter of 1.6" of the Africa ebony used for oboe etc. Independent, it places under a speaker, amplifier, etc. combining PB-20, and carries out. When a metaled spike is received, in metal, resonance is suppressed and the sound which was clear and became tight by intrusion of a moderate spike is obtained. Although it is of the same type as PB-10, since size is large, the stability at the time of installation increases[MORE]
PB-21 Setting base made of Africa ebony (4 pieces set)
Item# PB-21
$69.00
PB-23 Spike Receiving Base (4 pieces set)
It is a large-sized spike receptacle base of the Africa ebony used for oboe etc. Or combining PB-9 and PB-20, it places under a speaker, amplifier, etc. and a sound quality improvement can be performed. When a metaled spike is received, the sound which resonance was suppressed, was clear and became tight about metal is obtained. With 2.3" in diameter, and 0.8" in height, since it is large, it is stabilized and large-sized spike apparatus can be supported. [MORE]
PB-23 Spike Receiving Base (4 pieces set)
Item# PB-23
$129.00
PB-4-2 Point Base for amplifier and CD player (4 pair of Spike and Receptacle)
It is a setting base used, and PB-4? can obtain a clear reproduction sound by paving it under a CD player, an amplifier, and an analog player by the combination with receiving the pin and made of the Africa flavor tongue made of the gunmetal the [kuwaru] [shii] emergency that the sound strikes though the size is 2.4"×1.1" in height. [MORE]PB-4-2 Point Base for amplifier and CD player (Four pair of Spike and Receptacle)
$169.99
PB-12 base for small, medium speaker amplifier (4 pair of Spike, Receptacle and base block)
In the combination of the square-shaped base of Asada Cherry wood material, and the pin type base made from an ebony, it is stabilized and a minor type speaker is supported. A size is 1.38" in 2.76"x2.76" height, since the up-and-down side is even, is stabilized and supports a speaker. The inside of the base of Asada Cherry wood material is the concave form of the spike receptacle. [MORE]PB-12 base for small, medium speaker amplifier (Four pair of Spike, Receptacle and base block)
Item# PB-12 $99.00
PB-11A Speaker base for medium speaker amplifier (6 pair of Spike, Receptacle and base block)
Both PB-11A･PB-12 is a point support type speaker base of an upper and lower structure by the combination with the wood block made of the cherry blossoms material with a good pin and sound made of the flavor tongue. PB-11A is used in the size, and 90*90*78(H) and PB-12 can be used easily, and be used from the amplifier to the speaker widely with 70*70*35(H). In both products, it is features that it is easy to use for the structure of both storing the pin of a convex type in the wood block, and the stability level is high. PB-12 was selected to the '95 audio accessories magazine signature machine prize. [MORE]PB-11A Speaker base for medium speaker amplifier (Six pair of Spike, Receptacle and base block)
Item# PB-11A $299.00
HS-1As Africa ebony Headshell (6N Copper Wire)
HS-1A and HS-1As are new headshells improved by using headshell HS-1 made of the Africa ebony that has been put on the market since last year easily. HS-1 gets the high appraisal as getting popular, and the selection to great [kishou] of the audio accessories magazine, etc.However, there were a lot of products of a recent cartridge that were cut the main body the screw, and such a product got the point that it was not possible to install it. Then, our company decided to change the cartridge installation part of the main body of the shell from twisting off to the elongate hole. As a result, it comes to be able to use the cartridge the much more almost. [MORE]HS-1As Africa ebony Headshell (6N Copper Wire)
Item# HS-1As $159.00
HS-4S Carbon Fiber Headshell (6N Copper Wire)
HS-4S is the new style head shell which uses a high intensity and lightweight carbon fiber. A carbon fiber is the latest material that is adopted as an airplane, a racing car, etc. as tip compound material, and attracts attention. A carbon fiber is molded using an epoxy resin etc. and it is manufactured. The feature is proud of the weight of the abbreviation about 1/5, and twice as many high rigidity as steel and steel, and acoustic velocity (propagation rate of sound) is also excellent. [MORE]HS-4S Carbon Fiber Headshell ( 6N Copper Wire)
Item# HS-4S $229.00
HS-5 Titanium Headshell
HS-5 is the new style head shell which uses high intensity and comparatively lightweight metal titanium material. It can be called the material the quality of the material is light at the high purity titanium material of the appearance of astringent gray, high the quality of the material intensity and most promising as a head shell material in the material of a metal system. Specific gravity of titanium is abbreviation halves, such as 4.5 and brass, and since intensity is so hard that it is comparable also to steel, it is used for various tools etc. these days. [MORE]HS-5 Titanium Headshell
Item# HS-5 $259.009