RS-WHP1P

The high quality sound and cable-free connection will excite you!

No more listening to your favorite songs in iPod on poor earphone, with annoying long audio code. RS-WHP1P, the Wireless Digital Headphone set for iPod supplies you more comfortable condition for listen to music with high quality sound, than any other existing wireless headphone set.

You can enjoy your music without disturbing your family, room mates' sleep even at full volume, or at the midnight.

Compatible with:
iPod 3rd, 4th generation iPod Photo iPod mini
USB Audio device Mode Mac OS X 10.1 or later Mac OS 9.2.1 or later Windows 98SE/Me/2000/XP
Mac OS X 10.4 Ready!

*Features*
	[2.4GHz Digital Hi-Fi Wireless Transmitting System]	Connect the transmitter and iPod
Using 2.4 GHz ISM band. Brings more clear and lower noise sound than FM transmitting system. Includes AFH (Adapting Frequency Hopping) technology to avoid the interference from Wireless LAN device. The latest DSP technology and SBC CODEC keep CD quality sound. Wireless connection reaches up to 30 feet (in open space). Includes automatic pairing process, ID exchange, and automatic authentication. Free from interference from other transmitters.
	[Wireless Hi-Fi Headphone and iPod Transmitter]
Easy to setup. Just connect the transmitter and iPod with bundled short cable, and turn on the transmitter. (Refer to right image.) The WHP1P is fully compatible with PC/Mac as an universal Audio speaker. Refer to "USB Audio device mode", below. Closed Dynamic transducers and 53mm CCAW voice coil for the Driver Unit plays the sound vividly. Embedded rechargeable Li-ion buttery (both in the Headphone and iPod transmitter) allows long operation time around 11 hours, same as iPod. Adjustable comfortable headband (Patented by Audio Technica) reduces the stress of wearing the headphone for a long time. Package includes 3 types of iPod Clamps free. For iPod(3rd/4th generation) 15/20G q For iPod(3rd/4th generation) 40G and iPod Photo 40G/60G For iPod mini

*USB Audio device mode*
	iPod transmitter is compatible with not only iPod but Mac/PCs. You can send Mac/PC's sound to your headphone with the WHP1P. The transmitter will be recognized as a USB Audio device by these OSes. When you connect the transmitter to your Mac/PC, installation automatically starts. Enjoy DVD's movies, video game's sound or iTunes on Mac/PC directly on the Headphone, when your iPod is occupied for buttery charging. In USB audio mode, the transmitter is fully compatible with iTunes, Musicmatch Jukebox, Windows MediaPlayer, RealAudio, DVD playback software, and so on. You can use the Headphone as a universal wireless audio Headphone.

Device Requirement

	iPod
iPod series (3rd generation 15/20G, 4th generation 20/40G) iPod Photo series 40G/60G iPod mini *iPod Clamps are not compatible with iPod 1st and 2nd generation.
	USB Audio device mode
	*Must be connected to the headphone jack of the Audio device.
[Mac] Mac OS X 10.1 or later Mac OS 9.2.1 or later [Windows] Windows 98SE/Me/2000/XP

iPod Clamps

Specifications

Wireless connection

Frequency band:	2.4 GHz (2.402 to 2.480 GHz) ISM band
Modulation:	AFH (Adaptive Frequency Hopping)
Range:	30 feet range to the Headphone (in open space)
Antenna:	Pattern antenna (built-in type)

CODEC

Sub Band Coding (SBC) CODEC

iPod transmitter

Audio input:	Built-in standard 3.5mm (1/8 inch) stereo audio jack *Must connect to the headphone jack of the Audio device.
Input impedance:	16 ohm
Analog to Digital translation:	44.1 KHz, 16 bit, 2 ch (iPod mode)
Switch/Button:	Power switch Includes auto power off (iPod mode)
USB:	USB1.1 (USB Full Speed, 12 Mbps)
USB:	Power consumption: 90 mA
LED indicator:	[Link] Green: Connection is established Red: Connection is not established [Charge] Green: Buttery is in charging process Red: Shortage of the buttery (less than an hour) Light off: Buttery is ready
Buttery:	Lithium Ion Polymer Buttery (Rechargeable with AC adapter)
Buttery life:	Up to 11 hours
Charge time:	About 3 hours (includes overcharging protection)
Dimensions	50.0 mm(W)x 91.4 mm(D)x 14.0 mm(H)
Weight:	62.5 g

Wireless Headphone

Type:	Closed Dynamic
Driver Unit:	φ53 mm, Neodymium Magnet, CCAW voice coil
Sensitivity:	98 dB/mW
Frequency response:	20 Hz to 20,000 Hz
Switch/Button	Power switch Volume control button *includes auto power off, and volume memory
LED indicator:	[Battery] Red: Shortage of the buttery (less than an hour) [Link] Green: Connection is established Red: Connection is not established Orange: Now establishing the connection [Charge] Green: Buttery is in charging process
Frequency band:	2.4 GHz (2.402 to 2.480 GHz) ISM band with AFH (Adaptive Frequency Hopping)
Ear pad:	Artificial leather (Replaceable for optional ear pad)
Buttery:	Lithium Ion Polymer Buttery (Rechargeable with AC adapter)
Buttery life:	Up to 11 hours
Charge time:	About 3 hours (includes overcharging protection)
Weight:	360g

Package Includes

iPod transmitter (CR-TXB02)
Wireless Headphone (WHP1)
iPod transmitter stand
3 iPod Clamps
- for iPod mini (RSO-iPCL1)
- for iPod (3rd/4th generation) 15/20G (RSO-iPCL2)
- for iPod (3rd/4th generation) 40G and iPod Photo 40G/60G
  (RSO-iPCL3)
  *Put the rubber sheet between the transmitter and iPod 4th generation to be seated firmly.
Analog cable
4.5 cm cable with standard 3.5 mm (1/8 inch) stereo audio plug.
USB cable
120 cm USB cable with USB mini B-USB series standard A connector
Two AC adapters (RSO-AC05-10)
*One for iPod transmitter(CR-TXB02) and another for Wireless Headphone (WHP1)
User's Manual
1 year warranty

Device/System
Requirements

iPod mode

iPod 3rd, 4th generation/iPod Photo series, iPod mini
*iPod Clamp is not compatible with iPod 1st and 2nd generation.

USB Audio device mode
*Mac OS, Windows and Application software which support USB audio device.

[Mac]
Mac OS X 10.1 or later
Mac OS 9.2.1 or later

[Windows]
Windows 98SE/Me/2000/XP

[Application software]
*application software which supports USB audio device,
such as....
- iTunes
- Musicmatch Jukebox
- Windows MediaPlayer
- RealPlayer
- DVD Playback software

Warranty

1 year warranty