RS-Link1P

>>Sales Question mail

Change iPod into an Intelligent Remote Controller For your Audio Set!

Play thousands of songs on your palmtop with High-quality audio set. Share your favorite music with your family or friends.

RS-Link1P enables you to control the audio set from your palmtop. No more bothering yourself to change the disk, or search a song from a pile of CDs.

You can change all the settings without waking up from your bed, in your desk, or from a sofa of living room. You can use the transmitter in anywhere within a radius 30 feet (10m) from the receiver in open space.

Compatible with:

*iPod mode

iPod
iPod mini
iPod Photo USB Audio device mode

Mac OS X 10.1 or later
Mac OS 9.2.1 or later

Win 98SE/Me/2000/XP

Mac OS X
10.4
Ready!

Features

[2.4 GHz Digital Hi-Fi Wireless Transmitting System]

Using 2.4 GHz ISM band. Brings more clear and lower noise sound than FM transmitting system.
Includes AFH (Adapting Frequency Hopping) technology to avoid the interference from Wireless LAN device.
The latest DSP technology and SBC CODEC keep CD quality sound.

Wireless connection reaches up to radius 30 feet (in open space).

Includes automatic pairing process, ID exchange, and automatic authentication. Free from interference from other transmitters.

[iPod Transmitter & Audio Receiver]

Easy to setup. Just connect the transmitter and iPod with the bundled short cable, and turn on the transmitter. (Refer to right image.)

The transmitter is fully compatible with PC/Mac as an universal USB audio transmitter. Refer to "USB Audio device mode", below.

The transmitter works with Bus Power, when it connected to a USB port. Power consumption rate is below 100 mA. (Low power device.)

Package includes 3 types of iPod Clamps free.

For iPod(3rd/4th generation) 15/20G
For iPod(3rd/4th generation) 40G and iPod Photo 40G/60G
For iPod mini

Connect the transmitter and iPod

Watch DVD with theater sound! (USB Audio Device Mode)

iPod transmitter is compatible with not only iPod but Mac/PCs. You can send Mac/PC's sound to the audio receiver.

The transmitter will be recognized as a USB Audio device by these OSes. When you connect the transmitter to a USB port, installation automatically starts.

Enjoy DVD's movies, video game's sound or iTunes on Mac/PC on your audio set, when your iPod is occupied for buttery charging.

In USB audio mode, the transmitter is fully compatible with iTunes, Musicmatch Jukebox, Windows MediaPlayer, RealAudio, DVD playback software, and so on. You can use your audio set as an universal wireless audio speaker of your PC/Mac.

Device Requirement

iPod

iPod series (3rd generation 15/20G, 4th generation 20/40G)

iPod Photo series 40G/60G

iPod mini
*iPod Clamp is not compatible with iPod 1st and 2nd generation.

USB Audio device mode

*Must connect to headphone jack of the Audio device.

[Mac]
Mac OS X 10.1 or later
Mac OS 9.2.1 or later
[Windows]
Windows 98SE/Me/2000/XP

iPod Clamps

Specifications

Wireless connection

Frequency band: 2.4 GHz (2.402 to 2.480 GHz) ISM band

Modulation: AFH (Adaptive Frequency Hopping)

Range: 30 feet range to the Headphone (in open space)

Antenna: Pattern antenna (built-in type)

CODEC Sub Band Coding (SBC) CODEC

iPod Transmitter

Audio input: Built-in standard 3.5mm (1/8 inch) stereo audio jack
*Must connect to the headphone jack of the Audio device.

Input impedance: 16 ohm

Analog to Digital translation: 44.1 kHz, 16 bit, 2 ch (iPod mode)

Switch/Button: Power switch
Includes auto power off (iPod mode)

USB: USB1.1 (USB Full Speed, 12 Mbps)

Power consumption: 90 mA

LED indicator: [Link]
Green: Connection is established
Red: Connection is not established
[Charge]
Green: Buttery is in charging process
Red: Shortage of the buttery (less than an hour)
Light off: Buttery is ready

Buttery: Lithium Ion Polymer Buttery (Rechargeable with AC adapter)

Buttery life: Up to 11 hours

Charge time: About 3 hours (includes overcharging protection)

Dimensions 50.0 mm(W)x 91.4 mm(D)x 14.0 mm(H)

Weight: 62.5 g

Audio Adapter

Audio output Optical mini-plug stereo jack
(for both Analog mini plug and Optical circular connector)

Analog output line-out (2 ch)

Switch/Button Power switch

LED indicator: [Link]
Green: Connection is established
Red: Connection is not setablished

Dimensions 57 mm(W), 45.8 mm(D), 86.2 mm(H)

Power +5V (from AC adapter)

Power Consumption: 135 mA

Compatible
audio device Audio devices which has line-input analog mini jack or Optical digital input jack. (Compatible with both optical circular and rectangular).
*Not compatible with a device has no amplifier, such as headphone or so.

Package Includes

iPod transmitter (CR-TXB02)

iPod transmitter stand

3 iPod Clamps

for iPod mini (RSO-iPCL1)

for iPod(3rd/4th generation) 15/20G (RSO-iPCL2)

for iPod(3rd/4th generation) 40G and iPod Photo 40G/60G
(RSO-iPCL3)
*Put the rubber sheet between the transmitter and iPod 4th generation to be seated firmly.

Analog cable
1. 4.5 cm cable with standard 3.5 mm (1/8 inch) stereo audio plug.
2. 3.3 feet(100 cm) cable with 3.5 mm (1/8 inch) stereo audio plug to two RCA plugs.

Optical digital Audio Cable
3.3 feet (100 cm)/3.5 mm Optical circular to rectangular

USB cable
4 feet (120 cm) /USB cable with USB mini B-USB series standard A connector

AC adapter (RSO-AC05-10)
*For iPod transmitter

User's Manual

1 year warranty

Device Requirements iPod mode

iPod/iPod Photo series, iPod mini
iPod Clamp is not compatible with iPod 1st and 2nd generation.

USB Audio device mode
*Mac, Windows and Application software which support USB audio device.

[Mac]
Mac OS X 10.1 or later
Mac OS 9.2.1 or later

[Windows]
Windows 98SE/Me/2000/XP

[Application software]
*application software which supports USB audio device, such as...

iTunes

Musicmatch Jukebox

Microsoft MediaPlayer

RealAudio

DVD Playback software

Warranty 1 year warranty