CB31U Centronics 50 cable for CB31U D-Sub 25 cable for CB31U High Density 50 Female to Centronics 50 male Adapter High Density 50 Female to High Density 68 male Adapter High Density 50 Female to D-Sub 25 male Adapter CB31Pismo Centronics 50 cable for CB31Pismo D-Sub 25 cable for CB31Pismo High Density 50 Female to Centronics 50 male Adapter High Density 50 Female to High Density 68 male Adapter High Density 50 Female to D-Sub 25 male Adapter CBFW2 Spare dongle cable for CBFW2 AC adapter for CBFW2 CFU1U Spare cable for CFU1U CFU2U(まだコンテンツ送ってませんね。後で送ります。) Spare cable for CFU2U PCIU3U/PCIU2U Driver (Windows XP/2000/Me/98SE) Version 3.6 ================================================================================ [ PCIU3U/PCIU2U Setup CD-ROM ] Mar. / 04 / 2004 RATOC Systems,Inc. Copyright(C) 2003-2004 RATOC Systems,Inc. ================================================================================ This document supplements the User's Manual. Microsoft officially starts supporting USB2.0 driver for Windows XP/2000. In order for Windows XP users to use the Microsoft USB2.0 driver, install Service Pack1 on Windows XP. In order for Windows 2000 users to use the Microsoft USB2.0 driver, download the Microsoft USB2.0 driver with "Windows Update". For Windows Me/98SE users, Microsoft has not yet announced USB2.0 driver. Our originally developed USB2.0 driver supports Windows XP/2000/Me/98SE. If you have difficulty obtaining the Service Pack1 for Windows XP, you may use our original USB2.0 driver. If you don't have the Internet available on your Windows 2000 PC, you may use our original USB2.0 driver. Please read this Readme file carefully before using the products and understand the restrictions. The updated driver will be available through our web site whenever some issues are fixed. Our original USB2.0 driver has the following restriction: The driver support Isochronous transfer mode. <> [1] Directory structure [2] What's new from the previous version? [3] Information which corrects the User's Manual [4] How to update the old driver of the PCIU3U/PCIU2U [5] The known issues on the PCIU3U/PCIU2U [6] Tech support information [1] Directory structure -------------------------------------------------------------------------------- PCIU3U/PCIU2U Driver directory structure is as follows: + +--PCIUx_README-JPN.TXT(PCIU3U/PCIU2U Japanese Readme txt file ) +--PCIUx_README-ENG.TXT(PCIU3U/PCIU2U English Readme txt file ) +--PCIEHCI.INF ( USB2.0 Host Card INF File ) | +--Drivers | +--RSEHCD.SYS ( USB2.0 EHCI Driver ) | +--RSUSBD.SYS ( USB2.0 BUS Driver ) | +--RSUSBH.SYS ( USB2.0 HUB Driver ) | +--RSCOMP.SYS ( USB2.0 COMPOSITE Driver ) | +--Manual ( Include CDROM ) [2] What's new from the previous version? -------------------------------------------------------------------------------- The following was updated from Rev 3.5 to Rev 3.6. (1)Fixed problem blue panic in case of unplugged EPSON Scanner GT-9400UF. (2)Fixed problem system stop in case of abort sample extra event with REX-USB10. The following was updated from Rev 3.2 to Rev 3.5. (1)Support Canopus MTU2400. (2)Support Mac OS X 10.2.1 or later. The following was updated from Rev 3.1 to Rev 3.2. (1)Support Isochronous transfer mode. (2)Fixed problem does not work USB1.1 Device on Windows XP SP1 with RATOC Driver. The following was updated from Rev 3.0 to Rev 3.1. (1)Support PCIU3, PCIU4. (2)Add date record (12/02/2001) of setup information file. (3)Support COMPOSITE Device. The following was updated from Rev 2.0 to Rev 3.0. (1)Support Nikon Film Scanner. (2)Separate two CDROM(CBU2 and PCIU2). The following was updated from Rev 1.8 to Rev 2.0. (1)Fixed the issue with Windows Update to install Microsoft's USB2.0 driver for Windows 2000. The following was updated from Rev 1.7 to Rev 1.8. (1)Fixed the issue that Windows Me does not shutdown with OLYMPUS USB2.0 MO. The following was updated from Rev 1.6 to Rev 1.7. (1)Support multiple PCIU2 boards. (2)Support being able to use with other manufactures of USB2.0 interface card. The following was updated from Rev 1.5 to Rev 1.6. (1)Improve transfer speed by 110%. (2)Fixed hang up caused by wrong serial-NO USB2.0 Devices on Windows XP/2000. The following was updated from Rev 1.4 to Rev 1.5. (1)Support CanonScanner CanoScan D1250U2/D1250U2F. The following was updated from Rev 1.3 to Rev 1.4. Officially support USB2.0 HUB device. (1)Support USB2.0(HS) devices connected to a USB2.0 HUB. (Isochronous data transfer is not supported yet.) (2)Support USB1.0(FS) devices connected to a USB2.0 HUB. This version supports Split data transfer. With this Split data transfer, HS devices performance maintain even if HS and FS devices are connected to a USB2.0 HUB simultaneously. (3)Support USB2.0 HUB cascade connection. (4)CBU2 PNP Utility is updated to version 1.0. With this version, the utility will unload when the CBU2 is removed. (5)Fixed the issue that SONY VAIO PCG-GT3/K(Windows 2000) freezes up if the CBU2 has removed from the system with a USB device connected to the CBU2. The following was updated from Rev 1.2 to Rev 1.3. (1)The following issue is fixed. When you suspend SONY VAIO PCG-QR1S, the screen image disappears. But, the suspend fails and you can't resume the system anymore. (2)CBU2 PNP Utility is updated to version 0.22. With this version, the new revision of USB controller can be treated. The following was updated from Rev 1.1/1.0 to Rev 1.2. With this version 1.2, you can remove the CBU2 from your computer. -If you use Windows 98SE/Me, you can remove the CBU2 from your computer by clicking the CBU2 icon on the tasktray. -If you use Windows 2000, you can remove the CBU2 from your computer by clicking the removable icon on the tasktray. [3] Information which corrects the User's Manual -------------------------------------------------------------------------------- (Wrong) Page 18 (c)Deleting the driver. Search RSEHCD.SYS and RSUSBD.SYS in the C:WINNTSYSTEM32DRIVERS to delete them. (Right) Page 18 (c)Deleting the driver. Search RSEHCDCB.SYS and RSUSBD.SYS in the C:WINNTSYSTEM32DRIVERS to delete them. [4] How to update the old driver of the PCIU3U/PCIU2U -------------------------------------------------------------------------------- If you have already installed the old driver and try to update the old driver, follow the instructions to update the driver: 4-1.Windows 98SE (1)Insert the floppy disk containing the updated drivers. Right-click on My Computer, select Properties, and then select the Device Manager tab. (2)Double-click on the [Universal Serial Bus Controllers]. (3)Show the properties on [RATOC PCI USB Enhanced Host Controller]. (4)Click the [Driver] tab and click the [Update Driver] button. [Update Device Driver Wizard] will appear. Click [Next]. (5)Select the [Display a list of all the drivers in a specific location, so you can select the driver you want] option and click [Next]. (6)Click [Have Disk]. (7)Type in [A:] at the [Copy manufacturer's files from] and click [OK]. (8)Select [RATOC PCI USB Enhanced Host Controller] and click [Next]. (9)Click [Next]. (10)The updated driver will be copied. Click [Finish]. (11)Restart your computer after you finished installing the driver. 4-2.Windows Me (1)Insert the floppy disk containing the updated drivers. Right-click on My Computer, select Properties, and then select the Device Manager tab. (2)Double-click on the [Universal Serial Bus Controllers]. (3)Show the properties on [RATOC PCI USB Enhanced Host Controller]. (4)Click the [Driver] tab and click the [Update Driver] button. [Update Device Driver Wizard] will appear. Click [Next]. (5)Select the [Specify the location of the driver(Advanced)] option. Then, click [Next]. (6)Select the [Display a list of all the drivers in a specific location, so you can select the driver you want] option and click [Next]. (7)Click [Have Disk]. (8)Type in [A:] at the [Copy manufacturer's files from] and click [OK]. (9)Select [RATOC PCI USB Enhanced Host Controller] and click [Next]. (10)Click [Next]. (11)The updated driver will be copied. Click [Finish]. (12)Restart your computer after you finished installing the driver. 4-3.Windows XP/2000 If you have the Internet connection on Windows 2000, you can update the old driver to Microsoft Driver at Start Menu Windows Update. In order for Windows XP users to update the old driver to Microsoft Driver, install Service Pack1 on Windows XP. If you don't have the Internet connection on Windows 2000 or you have difficulty obtaining Service Pack1 for Windows XP, you can update the old driver to our latest RATOC Driver by following the steps: (1)Insert the floppy disk containing the updated drivers. Right-click on My Computer, select Properties, and then select the hardware tab. Then, click the Device Manager button. Double-click on the [Universal Serial Bus Controllers]. (2)Show the properties on [RATOC PCI USB Enhanced Host Controller]. (3)Click the [Driver] tab and click the [Update Driver] button. [Update Device Driver Wizard] will appear. Click [Next]. (4)Select the [Display a list of the known drivers for this device so that I can choose a specific driver] option. Click [Next]. (5)Click [Have Disk]. (6)Type in [A:] at the [Copy manufacturer's files from] and click [OK]. (7)Select [RATOC PCI USB Enhanced Host Controller] and click [Next]. (8)Click [Next]. (9)The updated driver will be copied. Click [Finish]. (10)Restart your computer after you finished installing the driver. [5] The known issues on the PCIU3U/PCIU2U -------------------------------------------------------------------------------- -Windows XP At this time, we don't know any of information. -Windows 2000 At this time, we don't know any of information. -Windows Me When waking up from sleep state, the system may freeze up. The driver doesn't support suspend/resume/hybernation. -Windows 98SE At this time, we don't know any of information. [6] Tech support information -------------------------------------------------------------------------------- You can reach our Tech support staff at the following: RATOC Systems International,Inc. Tech Support Open : Mon - Fri 9:30AM - 5:00PM PST Address:1933 O'Toole Avenue Suite A109 SanJose,CA 95131 U.S.A. TEL :(408)955-9400 FAX :(408)955-9402 E-mail :int-support@rexpccard.co.jp Web :http://www.ratocsystems.com (NOTE) Please include the information below to help us to assist you in your Tech-Support Question *Our product name/Serial No./retailer name *Host computer name *OS version *USB2.0 EHCI driver version *USB device name and its manufacturer END OF FILE