| 詳細 |
| 製品名 | eSATA PCI Express ボード |
| 製品型番 | REX-PE30S、REX-PE32S |
| ディストリビューション | Linux version 2.6.27.5-117.fc10.x86_64 |
| Linux用ドライバの入手方法 | ドライバは HOST ADAPTER DRIVER (sata_sil24)に含まれています。 これは、Fedora 10 (Linux Kernel 2.6.27.5-117.fc10)に含まれています。 Port Multiplier 1.1 がポートマルチプライヤをサポートします。 |
| ドライバ名 | scsi6 : sata_sil24 scsi7 : sata_sil24 |
| インストール方法 | OS起動時に自動で認識します。また、Port Multiplierに対応していますので、SA-DK5ESの5台のHDDが同時使用可能です。 ※REX-PE30Sに接続したHDDからOSの起動が可能です。(REX-PE30Sに接続した状態でOSを構築する必要があります) OSインストール/OS起動時、 sata_sil24 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 scsi6 : sata_sil24 scsi7 : sata_sil24 ata7: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 19 ata8: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 19 ata7: SATA link down (SStatus 0 SControl 0) ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 ata8.00: hard resetting link ata8.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) ata8.01: hard resetting link ata8.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8.02: hard resetting link ata8.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8.03: hard resetting link ata8.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8.04: hard resetting link ata8.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8.05: hard resetting link ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) ata8.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata8.00: configured for UDMA/100 ata8.01: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133 ata8.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata8.01: configured for UDMA/100 ata8.02: HPA detected: current 1465147055, native 1465149168 ata8.02: ATA-7: ST3750640AS, 3.AAE, max UDMA/133 ata8.02: 1465147055 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.02: configured for UDMA/100 ata8.03: HPA detected: current 1465147055, native 1465149168 ata8.03: ATA-7: ST3750640AS, 3.AAE, max UDMA/133 ata8.03: 1465147055 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.03: configured for UDMA/100 ata8.04: ATA-7: ST3250824AS, 3.AAE, max UDMA/133 ata8.04: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.04: configured for UDMA/100 ata8: EH complete scsi 7:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 sd 7:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 7:0:0:0: [sdb] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg2 type 0 scsi 7:1:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5 sd 7:1:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) sd 7:1:0:0: [sdc] Write Protect is off sd 7:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:1:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB) sd 7:1:0:0: [sdc] Write Protect is off sd 7:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 7:1:0:0: [sdc] Attached SCSI disk sd 7:1:0:0: Attached scsi generic sg3 type 0 scsi 7:2:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 sd 7:2:0:0: [sdd] 1465147055 512-byte hardware sectors (750155 MB) sd 7:2:0:0: [sdd] Write Protect is off sd 7:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:2:0:0: [sdd] 1465147055 512-byte hardware sectors (750155 MB) sd 7:2:0:0: [sdd] Write Protect is off sd 7:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 7:2:0:0: [sdd] Attached SCSI disk sd 7:2:0:0: Attached scsi generic sg4 type 0 scsi 7:3:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5 sd 7:3:0:0: [sde] 1465147055 512-byte hardware sectors (750155 MB) sd 7:3:0:0: [sde] Write Protect is off sd 7:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:3:0:0: [sde] 1465147055 512-byte hardware sectors (750155 MB) sd 7:3:0:0: [sde] Write Protect is off sd 7:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sd 7:3:0:0: [sde] Attached SCSI disk sd 7:3:0:0: Attached scsi generic sg5 type 0 scsi 7:4:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5 sd 7:4:0:0: [sdf] 488397168 512-byte hardware sectors (250059 MB) sd 7:4:0:0: [sdf] Write Protect is off sd 7:4:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:4:0:0: [sdf] 488397168 512-byte hardware sectors (250059 MB) sd 7:4:0:0: [sdf] Write Protect is off sd 7:4:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: [mac] sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 sdf11 sd 7:4:0:0: [sdf] Attached SCSI disk sd 7:4:0:0: Attached scsi generic sg6 type 0 を自動認識します。 |
| 補足 | HOST ADAPTER DRIVER (sata_sil24) は、ポートマルチプライヤには対応しています。ポートマルチプライヤを接続した場合は、すべてのドライブが検出されます。 |
| ユーザー様からの情報 | 特になし |
(2009.01.09現在)