| インストール方法 |
OS起動時に自動で認識します。
※REX-PE30Sに接続したHDDからOSの起動が可能です。(REX-PE30Sに接続した状態でOSを構築する必要があります)
OSインストール/OS起動時、
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
scsi0 : sata_sil24
scsi1 : sata_sil24
ata1: SATA max UDMA/100 cmd 0xffffc20000ac8000 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 19
ata2: SATA max UDMA/100 cmd 0xffffc20000aca000 ctl 0x0000000000000000
bmdma 0x0000000000000000 irq 19
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
scsi 0:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1
Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1)
Cmdline options: rw,nosuid,nodev,uhelper=hal,locale=en_US.UTF-8
Mount options:
noatime,rw,nosuid,nodev,uhelper=hal,silent,allow_other,nonempty,
fsname=/dev/sda1,blkdev,blksize=4096
mounted /dev/sda1 on behalf of uid 0
Unmounting /dev/sda1 ()
unmounted /dev/sda1 from '/media/disk' on behalf of uid 0
を自動認識します。 |
