Raspberry pi CM3/CM3+ carrier board for Audiophile

RAL-KCM3MB1 Use Raspberry Pi CM3/CM3+ and make Audiophile grade Network Player. Low noise and low EMI 3.3V/1.8V onboard regulators bring low distortion and high-fidility sound. Fully compatible with Raspberry Pi OS, Volumio, MooDeAudio and other OS/MPDs. Indipendene I2S,I2C and SPI connecters dor Audio DAC and SRC. High quality and high performance Analog circuit. Three status LED(Power,Act,Shutdown) and PowerON/Shutdown push button SW. microSD card slot for CM3/3+ Lite microUSB OTG port to write eMMC on CM3/3+

Wifi Environment Sensor
	WFEVS1 Environment: RH/T,CO2,VOC and PM2.5 Sensor. Get data with iOS/Android App.s through AWS cloud service.

USB to Serial converter (USB Std.A type)
	RS-USB602F Connect RS-232C serial devices such as barcode scanner, etc with serial interface via this converter. <Discontinued> RS-USB602F

USB to Serial converter (USB Type-C type)
	RS-USB602FC Connect RS-232C serial devices such as barcode scanner, etc with serial interface via this converter. <Discontinued> RS-USB602FC

USB to Serial converter (Micro USB B type)
	USB60MB Connect RS-232C serial devices such as barcode scanner, etc with serial interface via this converter. >> USB60MB User's Manual Download.

SPI/I2C Protocol Emulator
	USB61 USB61 SPI/I2C Protocol Emulator converts PC USB transactions to the SPI/I2C Bus. [ RATOC e2e store ] USB61 User's Mnual Download.

SPI/I2C Bus Analyzer
	USB62 Using the USB62, your PC will be the SPI/I2C Bus analyzer. [ RATOC e2e store ] >> USB62 User's Manual Download.

Isolated I2C Digital I/O board for Raspberry-Pi
	RPi-GP10 8ch Input and 8ch Output ports on HAT size board for Raspberry Pi Digital Input/Output board suitable for FA/LA machine. Two models are prepared. (Terminal block model and MIL connector model) Adopt digital isolator for fast transmission. Common power terminal for power supply to I/O terminal and grounding. Open sample source code and setup guide to use this product on Rasperry Pi.

Isolated SPI A/D converter board for Raspberry-Pi
	RPi-GP40 8ch Analog Input and 1ch Digital Output on HAT size board. A/D converter board suitable for analog signal acquisition. Two models are prepared (Terminal block model and MIL connector model) MIL connector model has digital input function. Resolution 12bit/500ksps, Changeable input voltage range. Open sample source code and setup guide to use this product on Rasperry Pi.

Isolated I2C Serial board for Raspberry-Pi
	RPi-GP60 Isolated serial board plugs into GPIO40Pin connector on a Raspberry Pi. D-Sub9pin connector and 10pin box connector on the board. Each port can be used as RS-232C or RS-485/RS422A(half-duplex/full-duplex). Autodirection control function on half-duplex. SC16IS752 is onboard. Isolates between seiral ports and GPIO40pin(Isolation Voltage 2.5kV)

Isolated I2C Pulse signal I/O board for Raspberry-Pi
	RPi-GP90 Isolated serial board plugs into GPIO40Pin connector on a Raspberry Pi. D-Sub9pin connector and 10pin box connector on the board. Each port can be used as RS-232C or RS-485/RS422A(half-duplex/full-duplex). Autodirection control function on half-duplex. SC16IS752 is onboard. Isolates between seiral ports and GPIO40pin(Isolation Voltage 2.5kV)

Main I/O board for Raspberry-Pi CM3
	RPi-CM3MB2 / RPi-CM3MB2-PoE RPi-CM3MB2 / RPi-CM3MB2-PoE is an I / O board for Raspberry Pi suitable for IoT in embedded devices. Compatible with Raspberry Pi Compute Module 3/3 Lite.

Main I/O board (small type) for Raspberry-Pi CM3
	RPi-CM3MB3 RPi-CM3MB3 is an I / O board for Raspberry Pi suitable for IoT in embedded devices. Compatible with Raspberry Pi Compute Module 3/3 Lite.

IR controlboard (UART/USB compatible)for Raspberry-Pi
	RPi-IREX RPi-IREX is an expansion kit that allows you to add an infrared learning remote control function by connecting to a Raspberry Pi and programming.