Isolated I2C Serial board for Raspberry-Pi
RPi-GP60
- Isolated serial board plugs into GPIO40Pin connector on a Raspberry Pi.
- D-Sub9pin connector and 10pin box connector on the board.
- Each port can be used as RS-232C or RS-485/RS422A(half-duplex/full-duplex).
- Autodirection control function on half-duplex.
- SC16IS752 is onboard.
- Isolates between seiral ports and GPIO40pin(Isolation Voltage 2.5kV)
Specifications
Hardware specifications
| Product name | Isolated I2C Serial board for Raspberry Pi |
|
| Model numder | RPi-GP60 | |
| Interface | GPIO40pins > I2C | |
| Controller | SC16IS752 | |
| Serial Port | D-Sub9 male x1, 10Pin BOX header x1 *Attached D-Sub9pin cable for 10Pin BOX header |
|
| External Power Terminal | 2Pin Terminal *Supply 5V when RI pin is configured to output 5V. |
|
| RS-232C | TIA/EIA-232F* *Configured by jumper setting. |
|
| RS-485 / 422A (half-duplex/full-duplex) |
TIA/EIA-485-A, TIA/EIA-422-B* Half-duplex is autodirection control. *Configured by jumper setting. |
|
| Data transfer rate(Baudrate) | 110, 300, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600,（115200, 230400, 460800, 921600）bps *Recommend using flow control over 115200bps because of I2C limitation(100kHz). *Up to 460800bps with RS-232C because of transceiver limitation(650kbps). *Up to 921600bps with RS-485/422A because of serial controller limitation. |
|
| FIFO | Transmit buffer 64Byte / Receive buffer 64Byte | |
| Isolation Voltage |
2.5kV(Serial port - GPIO40pin) *It is non-isolated between the two serial ports. |
|
| ESD protection | 15kV(Transceiver specification) | |
| Required power | +5V / +3.3V (provided by GPIO) | |
| Consumption current | Maximum 5V/150mA, 3.3V/20mA | |
| Suitable environment | Temp：0～40℃、Humid：20～80%（not condensation） | |
| Dimensions | 65.0 x 56.5 mm *Protrusions are not included in the dimensions. |
|
| Weight | about 28 g | |
| Product content | RPi-GP60 board D-Sub9pin cable for 10Pin box header(Approx. 10cm) Short plug x10(Two of them are plugged into a board.) GPIO 40P pin header M2.6 spacer x4 M2.6 screw x8 Appended document Warranty |
|
| Software | Python3 sample program | |
| Warranty | 1-year | |
| Manufacture(Country) | Japan | |
Product Photo
Service & Support
- Manual / Drivers
all products
